SSDLife reports the error “SSDs not found”
What does this message mean and how do I fix it?
attention!
Unfortunately, the current version of SSDLife does not support modern M2 SSD solid state disks. Therefore, it is most likely that this error message is caused by the fact that you have such a disk. However, if you have SATA SSD disks and you still see the error, read the explanation below.
A version of SSDLife with M2 disk support is in development and we plan to release it later this year.
Что это означает?
This message informs you that SSDLife failed to find any SSDs on your computer.
Why does it happen?
There can be several causes, let’s take them in detail.
1. You have a “fake” SSD.
This problem often occurs on some netbooks. Manufacturers are sometimes a bit insincere and write that their netbook is equipped with an SSD while it is actually equipped not with a real SATA SSD, but only with flash memory, something like an improved flash drive. This simplified drives have no built-in S.M.A.R.T. system and send no data about their technical condition so it is impossible to control their health.
2. You use a RAID array.
If you use a RAID array to increase performance or reliability (a RAID0 array is most often used), it is impossible to control SSDs in such an array in most cases. This is because RAID drivers forbid access to separate drives in the array and SSDLife cannot get any information about the drives. This problem also occurs in Sony Vaio Z laptops because SSDs use RAID there by default so it is impossible to control them.
3. Your SATA controller drivers do not support S.M.A.R.T.
It is similar to the previous problem in a way, except that it occurs even if you do not use RAID. Unfortunately, some manufacturers of SATA controllers do not implement S.M.A.R.T. support in their drivers so it is impossible to access SSD diagnostic data. For example, nVidia nForce chipsets were once notorious for that.
What should I do?
Unfortunately, it is nearly impossible to do anything in cases 1-2. You can hardly name the advice not to use RAID reasonable 🙂 As an option, you can use a software-based RAID built into Windows – it is possible to get information about SSDs in this case. In the third case, you can try to install drivers not from the manufacturer, but from Microsoft – it may help.